Knowledgebase: Firewall
Enable Firewall Log
Posted by Billion UK FAE 07 on 10 January 2010 08:25 PM
 The Firewall Log is a vary useful tool, it will list the ports which are blocked by the firewall appears in the Event Log. You can use this information by adding a rule in the Packet Filtering List to unblock the port.



Once the Firewall Log is enabled go to the Event Log to see the blocked ports.



Now, you can go to the Packet Filter List to add a rule to unblock the ports.





Next save the settings permanently.

 

Comments (0)