Knowledgebase : General
Yes, all Billion routers should support UPnP(Universal Plug and Play) and this feature is enabled by default.
Please visit http://www.whatsmyip.org/. Alternatively, you can also login to your router (http://192.168.1.254) and find it under WAN IP.
There is a PPP or Internet LED on every Billion router (usually found on the right hand side of the router next to the ADSL LED),  when this LEd lit up it  indicates an established Internet connection.
NAT (Network Address Translation) is used on routers to enable multiple hosts on a private network to access the Internet using a single public IP address. Regardless of your ISP (Internet Service Provider), you will be assigned a public IP address upon c...
Since an ADSL modem / router is different from a USB or PCI ADSL modem, you do not need to install any drivers to get it up and running.
Connected your Billion router with your computer with the Ethernet cable (RJ-45) provide, we recommend to use the Ethernet cable for initial setup even if you have a wireless connection to rule out any potential wireless issues. 1) Open your Web Browser (...
The default LAN IP address of all Billion routers are usually: 192.168.1.254
The default login details for all Billion routers are as follows: Default Username: admin Default Password: admin
You can assign IP address to the windows based computer using the b elow steps: Click Start, click Control Panel, click '''Network and Internet Connections, and then click Network Connections.''' 1. Right-click the network connection that is connect...
Attached is guide to help manually setup the 8800/8900 with a VDSL (PTM) PPPoE connection from default settings, also how to change the 'admin' password for the device and how to setup port forwarding rules
Billion IPTV Setup Guide